Symphony E10 Flash File 100% Ok By CM2 SCX15_SP7715GA_[NAND_b256k]_E10_4.4.2_E10_1_XXX_V01.5_V09.0_20150825_E10

SCX15_SP7715GA_[NAND_b256k]_E10_4.4.2_E10_1_XXX_V01.5_V09.0_20150825_E10

 ====  Wait for phone...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok ,  0x13 , NAND : b256k
[FW_READER] : Step #3 Passed!
Model Name  : E10
Model Brand : symphony
Model Device: E10
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA
Project Ver : E10_1_XXX_V01.5_V09.0_20150825
Model Ext   : E10

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W15.18_Release.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img

AndroidInfo created
Firmware Size : 338 MiB
Saved to : F:\CM2 Read\SCX15_SP7715GA_[NAND_b256k]_E10_4.4.2_E10_1_XXX_V01.5_V09.0_20150825_E10\
Done!

Elapsed: 00:05:52

Reconnect Power/Cable!

SCX15_SP7715GA_[NAND_b256k]_E10_4.4.2_E10_1_XXX_V01.5_V09.0_20150825_E10

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE BY RAJIB

RAJIB BLOG:-https://nusrattelecomkdp.blogspot.com/