Walton Primo EF4 Flash File 100% Ok WALTON_Primo_EF4_6.0_Primo_EF4_S007_05092016_Primo_EF4

WALTON_Primo_EF4_6.0_Primo_EF4_S007_05092016_Primo_EF4

- > Wait phone connected ...

Phone found! [ 14 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v1.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Primo_EF4
Model Brand : WALTON
Model Device: Primo_EF4
AndrVersion : 6.0
BaseBand CPU: WALTON
Project Ver : Primo_EF4_S007_05092016
Model Ext   : Primo EF4

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.23.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2625 MiB
Saved to : C:\Users\Rajib Telecom\Desktop\WALTON_Primo_EF4_6.0_Primo_EF4_S007_05092016_Primo_EF4\
Done!

Elapsed: 00:08:42

Reconnect Power/Cable!

WALTON_Primo_EF4_6.0_Primo_EF4_S007_05092016_Primo_EF4

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE BY RAJIB
RAJIB BLOG:-https://nusrattelecomkdp.blogspot.com/

CONTACT WITH US,CALL:- +8801840423939/01630616406

Winmax Xc11 Flash File 100% Ok CM2 Read MT6582__android__XC11__android__4.4.2__ALPS.KK1.MP1.V2.11

MT6582__android__XC11__android__4.4.2__ALPS.KK1.MP1.V2.11

Wait for phone...
Phone found! [ 62 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 700100563130303038501A06D7956213
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80001
[eMMC] : FLASH_CID : 700100563130303038501A06D7956213
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C3000000
[eMMC] : FLASH_UCP : 7216 MiB [eMMC 8 GiB]
DEV RID    : 0x00E225DBDEDC751802CA6F1C1D99A237
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : android
ProdName  : XC11
ProdModel : XC11
Device    : android
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.11

[Read Ok] : preloader_b808_jinhuima_b23_qhd.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / b808_jinhuima_b23_qhd / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1054 MiB
Scatter saved to : C:\Users\Rajib Telecom\Desktop\MT6582__android__XC11__android__4.4.2__ALPS.KK1.MP1.V2.11\

All done!

Done!
Elapsed: 00:04:38
Reconnect Power/Cable!

MT6582__android__XC11__android__4.4.2__ALPS.KK1.MP1.V2.11

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE BY RAJIB
RAJIB BLOG:-https://nusrattelecomkdp.blogspot.com/

CONTACT WITH US,CALL:- +8801840423939/01630616406

Walton Primo HM4+ Flash File 100% Ok By CM2 Read MT6580__Walton__Primo_HM4+__Primo_HM4_PLUS__7.0__alps-mp-n0.mp2-V1_vs6580.we.n_P27

MT6580__Walton__Primo_HM4+__Primo_HM4_PLUS__7.0__alps-mp-n0.mp2-V1_vs6580.we.n_P27

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 700100454841454641011555822B14C5
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , AFEAH
[eMMC] : FLASH_CID : 700100454841454641011555822B14C5
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000390000000
[eMMC] : FLASH_UCP : 14592 MiB [eMMC 16 GiB]
DEV RID    : 0x00E225DB56F02A119324B5F7FFBE13DE
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Walton
ProdName  : Primo_HM4_PLUS
ProdModel : Primo HM4+
Device    : Primo_HM4_PLUS
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-n0.mp2-V1_vs6580.we.n_P27

[Read Ok] : preloader_vs6580_we_n.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / vs6580_we_n / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2842 MiB
Scatter saved to : C:\Users\Rajib Telecom\Desktop\MT6580__Walton__Primo_HM4+__Primo_HM4_PLUS__7.0__alps-mp-n0.mp2-V1_vs6580.we.n_P27\

All done!

Done!
Elapsed: 00:14:24
Reconnect Power/Cable!

MT6580__Walton__Primo_HM4+__Primo_HM4_PLUS__7.0__alps-mp-n0.mp2-V1_vs6580.we.n_P27

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE BY RAJIB
RAJIB BLOG:-https://nusrattelecomkdp.blogspot.com/

CONTACT WITH US,CALL:- +8801840423939/01630616406

Huawei Y600-U-40 Flash File 100% Ok CM2 Read MT6572__HUAWEI__HUAWEI_Y600-U40__HWY600-U__4.2.2__Y600-U40V100R001C26B001SP01

MT6572__HUAWEI__HUAWEI_Y600-U40__HWY600-U__4.2.2__Y600-U40V100R001C26B001SP01

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040501A258AFA1FB
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040501A258AFA1FB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0x00E225DB4B7A4800C7AC1F883B3A290B
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : HUAWEI
ProdName  : Y600-U40
ProdModel : HUAWEI Y600-U40
Device    : HWY600-U
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : Y600-U40V100R001C26B001SP01

[Read Ok] : preloader_huaqin72_we_b2b_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / huaqin72_we_b2b_jb3 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 683 MiB
Scatter saved to : C:\Users\Rajib Telecom\Desktop\MT6572__HUAWEI__HUAWEI_Y600-U40__HWY600-U__4.2.2__Y600-U40V100R001C26B001SP01\

All done!

Done!
Elapsed: 00:03:38
Reconnect Power/Cable!

MT6572__HUAWEI__HUAWEI_Y600-U40__HWY600-U__4.2.2__Y600-U40V100R001C26B001SP01

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE BY RAJIB
RAJIB BLOG:-https://nusrattelecomkdp.blogspot.com/

CONTACT WITH US,CALL:- +8801840423939/01630616406

Walton Primo H4 Flash File 100% Ok CM2 Read MT6580__Walton__Primo_H4__Primo_H4__5.1__Primo_H4_S008_26082015

MT6580__Walton__Primo_H4__Primo_H4__5.1__Primo_H4_S008_26082015

Wait for phone...
Phone found! [ 51 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513732534D4200E4EDF44B72D9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMS27
[eMMC] : FLASH_CID : 150100513732534D4200E4EDF44B72D9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x00E225DBA19794E2EA7900EEB563072A
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Walton
ProdName  : Primo H4
ProdModel : Primo H4
Device    : Primo_H4
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : Primo_H4_S008_26082015

[Read Ok] : preloader_konka6580_w551_we_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / konka6580_w551_we_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1940 MiB
Scatter saved to : C:\Users\Rajib Telecom\Desktop\MT6580__Walton__Primo_H4__Primo_H4__5.1__Primo_H4_S008_26082015\

All done!

Done!
Elapsed: 00:08:45
Reconnect Power/Cable!

MT6580__Walton__Primo_H4__Primo_H4__5.1__Primo_H4_S008_26082015

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE BY RAJIB
RAJIB BLOG:-https://nusrattelecomkdp.blogspot.com/

CONTACT WITH US,CALL:- +8801840423939/01630616406

Symphony V52 Flash File 100% Ok CM2 Read HY805A_hy805a_symphony_5.1_V52_XXX_V5_V52

HY805A_hy805a_symphony_5.1_V52_XXX_V5_V52

Phone found! [ 13 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 13 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : hy805a_symphony
Model Brand : Symphony
Model Device: hy805a_symphony
AndrVersion : 5.1
BaseBand CPU: HY805A
Project Ver : V52_XXX_V5
Model Ext   : V52

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2124 MiB
Saved to : C:\Users\Rajib Telecom\Desktop\HY805A_hy805a_symphony_5.1_V52_XXX_V5_V52\
Done!

Elapsed: 00:05:34

Reconnect Power/Cable!

HY805A_hy805a_symphony_5.1_V52_XXX_V5_V52

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE BY RAJIB
RAJIB BLOG:-https://nusrattelecomkdp.blogspot.com/

CONTACT WITH US,CALL:- +8801840423939/01630616406