Symphony i21 Flash File 100% Ok CM2 Read SP7731GEA_HDR_i21_6.0_i21_HW1_V6_i21

SP7731GEA_HDR_i21_6.0_i21_HW1_V6_i21

- > Wait phone connected ...

Phone found! [ 3 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : i21
Model Brand : Symphony
Model Device: i21
AndrVersion : 6.0
BaseBand CPU: SP7731GEA_HDR
Project Ver : i21_HW1_V6
Model Ext   : i21

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W16.29.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2140 MiB
Saved to : C:\Users\Rajib Telecom\Desktop\SP7731GEA_HDR_i21_6.0_i21_HW1_V6_i21\
Done!

Elapsed: 00:05:31

Reconnect Power/Cable!

SP7731GEA_HDR_i21_6.0_i21_HW1_V6_i21

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE BY RAJIB

RAJIB BLOG:-https://nusrattelecomkdp.blogspot.com/

CONTACT WITH US,CALL:- +8801840423939/01630616406

Lava R1 Flash File 100% Ok CM2 Read MT6737M__Lava__LAVA_RI__LAVA_R1__6.0__alps-mp-m0.mp1-V2.84_lava6737m.65.m0_P120

MT6737M__Lava__LAVA_RI__LAVA_R1__6.0__alps-mp-m0.mp1-V2.84_lava6737m.65.m0_P120

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D333145FBC90D42198105D2
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM31E
[eMMC] : FLASH_CID : 150100514531334D420DC9FBD2052419
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0x00E225DB0DDEDB6546D57C3DBCB9B8C0
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Lava
ProdName  : LAVA_R1
ProdModel : LAVA_RI
Device    : LAVA_R1
AndroidVer: 6.0
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-m0.mp1-V2.84_lava6737m.65.m0_P120

[Read Ok] : preloader_lava6737m_sp504_int.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / lava6737m_sp504_int / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 3070 MiB
Scatter saved to : M:\Flash\MT6737M__Lava__LAVA_RI__LAVA_R1__6.0__alps-mp-m0.mp1-V2.84_lava6737m.65.m0_P120\

All done!

Done!
Elapsed: 00:09:53
Reconnect Power/Cable!

 

MT6737M__Lava__LAVA_RI__LAVA_R1__6.0__alps-mp-m0.mp1-V2.84_lava6737m.65.m0_P120

 DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE BY RAJIB

  RAJIB BLOG:-https://nusrattelecomkdp.blogspot.com/

CONTACT WITH US,CALL:- +8801840423939/01630616406

Micromax Q349 Flash File 100% Ok CM2 Read MT6580__Micromax__Micromax_Q349__Q349__6.0__ALPS.W10.24.p0

MT6580__Micromax__Micromax_Q349__Q349__6.0__ALPS.W10.24.p0

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505074E7BF04C6399
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505074E7BF04C6399
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x00E225DB6DAF0E8285F0923F013C1BC9
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Micromax
ProdName  : Q349
ProdModel : Micromax Q349
Device    : Q349
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.W10.24.p0

[Read Ok] : preloader_p4200.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / p4200 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2563 MiB
Scatter saved to : C:\Users\Rajib Telecom\Desktop\MT6580__Micromax__Micromax_Q349__Q349__6.0__ALPS.W10.24.p0\

All done!

Done!
Elapsed: 00:13:11
Reconnect Power/Cable!

MT6580__Micromax__Micromax_Q349__Q349__6.0__ALPS.W10.24.p0

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE BY RAJIB

RAJIB BLOG:-https://nusrattelecomkdp.blogspot.com/

CONTACT WITH US,CALL:- +8801840423939/01630616406

Winmax XC7 Flash File 100% Ok CM2 Read MT6582__Winmax__XC7__Winmax_XC7__4.4.2__ALPS.KK1.MP1.V2.10

MT6582__Winmax__XC7__Winmax_XC7__4.4.2__ALPS.KK1.MP1.V2.10

Wait for phone...
Phone found! [ 43 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473264040501A2D2602217
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A4838473264040501A2D2602217
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x00E225DB35B0090827B19CECB89E85AB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : Winmax
ProdName  : Winmax_XC7
ProdModel : XC7
Device    : Winmax_XC7
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.10

[Read Ok] : preloader_sm619_w_yt_xc7_82.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / sm619_w_yt_xc7_82 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 809 MiB
Scatter saved to : F:\CM2 Read\MT6582__Winmax__XC7__Winmax_XC7__4.4.2__ALPS.KK1.MP1.V2.10\

All done!

Done!
Elapsed: 00:04:03
Reconnect Power/Cable!

MT6582__Winmax__XC7__Winmax_XC7__4.4.2__ALPS.KK1.MP1.V2.10

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE BY RAJIB

RAJIB BLOG:-https://nusrattelecomkdp.blogspot.com/

CONTACT WITH US,CALL:- +8801840423939/01630616406

Symphony P6 Flash File 100% Ok CM2 Read MT6582__Symphony__P6__P6__5.0__S3566_DS35661_SYMPHONY-P6-FLFineOS_L102

MT6582__Symphony__P6__P6__5.0__S3566_DS35661_SYMPHONY-P6-FLFineOS_L102

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513832334D42006E359ABE8383
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D42006E359ABE8383
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0x00E225DB6504DDA8A2D9B0CBA86E8AB7
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : Symphony
ProdName  : P6
ProdModel : P6
Device    : P6
AndroidVer: 5.0
MTKxCPU   : MT6582
MTKxPRJ   : S3566_DS35661_SYMPHONY-P6-FLFineOS_L102

[Read Ok] : preloader_s3566.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : test.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / s3566 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1362 MiB
Scatter saved to : C:\Users\Rajib Telecom\Desktop\MT6582__Symphony__P6__P6__5.0__S3566_DS35661_SYMPHONY-P6-FLFineOS_L102\

All done!

Done!
Elapsed: 00:05:33
Reconnect Power/Cable!

P6_HW1_V8

MT6582__Symphony__P6__P6__5.0__S3566_DS35661_SYMPHONY-P6-FLFineOS_L102

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE BY RAJIB

RAJIB BLOG:-https://nusrattelecomkdp.blogspot.com/

CONTACT WITH US,CALL:- +8801840423939/01630616406

Walton Primo NH3 Lite Flash File 100% Ok CM2 Read MT6580__WALTON__Primo_NH3_Lite__Primo_NH3_Lite__7.0__alps-mp-n0.mp2-V1_vs6580.we.n_P6

MT6580__WALTON__Primo_NH3_Lite__Primo_NH3_Lite__7.0__alps-mp-n0.mp2-V1_vs6580.we.n_P6

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847346192A22194D92B342B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , ’a4G8
[eMMC] : FLASH_CID : 90014A483847346192A22194D92B342B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x00E225DBE8130B0B9A0629A9D38832EE
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : WALTON
ProdName  : Walton_Primo_NH3_Lite
ProdModel : Primo NH3 Lite
Device    : Primo NH3 Lite
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-n0.mp2-V1_vs6580.we.n_P6

[Read Ok] : preloader_vs6580_we_n.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / vs6580_we_n / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2726 MiB
Scatter saved to : C:\Users\Rajib Telecom\Desktop\MT6580__WALTON__Primo_NH3_Lite__Primo_NH3_Lite__7.0__alps-mp-n0.mp2-V1_vs6580.we.n_P6\

All done!

Done!
Elapsed: 00:12:08
Reconnect Power/Cable!

MT6580__WALTON__Primo_NH3_Lite__Primo_NH3_Lite__7.0__alps-mp-n0.mp2-V1_vs6580.we.n_P6

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE BY RAJIB

RAJIB BLOG:-https://nusrattelecomkdp.blogspot.com/

CONTACT WITH US,CALL:- +8801840423939/01630616406